Tesla Model S Owners & Service Manuals

Tesla Model S: Cleaning

READ NEXT:

 Cleaning the Exterior

To prevent damage to the paint, immediately remove corrosive substances (bird droppings, tree resin, dead insects, tar spots, road salt, industrial fallout, etc.). Do not wait until Model S is due

 Cleaning the Interior

Frequently inspect and clean the interior to maintain its appearance and to prevent premature wear. If possible, immediately wipe up spills and remove marks. For general cleaning, wipe interior sur

 Polishing, Touch Up, and Body Repair

To preserve the cosmetic appearance of the body, you can occasionally treat the paint surfaces with an approved polish containing: Very mild abrasive to remove surface contamination without remo

SEE MORE:

 Handle and Cable Assembly - 40A Wall Connector (Remove and Replace)

Note: This procedure describes how to remove and replace the 40A Wall Connector handle and cable assembly. For instructions on how to remove and replace the 80A Wall Connector handle and cable assembly, refer to procedure 50022002 (refer to procedure). Removal Warning

 Mount - Front Drive Unit - LH (Remove and Replace) - Installation

Installation Loosen the bolts that secure the 2 sections of the LH motor mount. Set the new motor mount into position. Secure the 3 bolts that secure the motor to the LH motor mount (torque 38 Nm). Secure the

© 2019-2026 Copyright www.tesms.org