Tesla Model S Owners & Service Manuals

Tesla Model S: Disclaimers

READ NEXT:

 Event Data Recorder (EDR)

Model S is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obsta

 Data Sharing

For quality assurance and to support the continuous improvement of advanced features such as Autopilot, your Model S may collect analytics, road segment, diagnostic, and vehicle usage data and send

 Reporting Safety Defects

Contacting Tesla For detailed information about your Model S, go to http://www.tesla.com and log on to your Tesla account or sign up to get an account. If you have any questions or concerns about y

SEE MORE:

 Pipe - High Pressure - Compressor to Condenser (Dual Motor) (Remove and Replace)

Removal Position the vehicle on a lift, but do not raise it at this time. Recover refrigerant from the vehicle (refer to procedure). Remove the 12V battery (refer to procedure). Remove the bolt that secures the high pressure pipe to the compressor (torque 10 Nm).

 Mount - Front Drive Unit - RH (Remove and Replace) - Installation

Installation Use alcohol wipes to clean the mating surfaces between the RH drive unit mount and drive unit. Place a shear plate on the outboard side of the drive unit mount so that the shear plate bolt holes align with the motor mount bolt holes. Cau

© 2019-2026 Copyright www.tesms.org