Tesla Model S: Driver Profiles
READ NEXT:
When you first adjust the driver's seat, steering yoke
position, or exterior side mirrors, the touchscreen
prompts you to create a driver profile to save these
adjustments. Your profile also saves
To adjust Model S based on a
driver's
profile, touch the driver profile icon at the
top of the Controls screen. Then choose
the driver, and Model S is adjusted based
on the settings that have be
You can link a driver profile to a key (or keys) to allow
Model S to automatically select the correct driver profile
when the linked key is detected as you approach the
vehicle and open the driver'
SEE MORE:
The only reservoir into which you can add fluid is the
windshield washer fluid reservoir, which is located
behind the front trunk. When the level is low, a message
displays on the instrument panel.
To top up the washer fluid:
1. Open the hood.
2. Clean around the filler cap before opening it to
Removal
Remove the door trim cover (refer to procedure)
Disconnect the door module harness connectors (x3).
Remove the screws (x3) that secure the control module to the
door panel (torque 2 Nm).
Remove the door controller module.