Tesla Model S: Driving
Tesla Model S (2012-2026) Owner's Manual / Driving
- Driver Profiles
- Steering Yoke
- Adjusting Steering Yoke Position
- Overview of Steering Yoke Buttons
- Left Scroll Button
- Right Scroll Button
- Mirrors
- Starting and Powering Off
- Shifting
- Lights
- Instrument Panel
- Wipers and Washers
- Braking and Stopping
- Traction Control
- Park Assist
- Vehicle Hold
- Acceleration Modes
- Track Mode
- Trip Information
- Getting Maximum Range
- Rear Facing Camera(s)
- Cold Weather Best Practices
READ NEXT:
Creating a Driver Profile
When you first adjust the driver's seat, steering yoke
position, or exterior side mirrors, the touchscreen
prompts you to create a driver profile to save these
adjustments. Your profile also saves
Selecting Between Driver Profiles
To adjust Model S based on a
driver's
profile, touch the driver profile icon at the
top of the Controls screen. Then choose
the driver, and Model S is adjusted based
on the settings that have be
SEE MORE:
Using Track Mode
Track Mode is always disabled when you start Model S.
To enable Track Mode for your current drive, shift into
Park and follow these steps:
1. Touch Controls > Pedals & Steering > Track Mode.
When enabled, TRACK displays on the instrument
panel above the driving speed, and a Track Mode
Media Control Unit - Touch Screen (Remove and Replace)
Backup
Connect a laptop with Toolbox 2.0 or later to the vehicle.
Select Panels > Gateway and Center Display > MCU
Cloner.
Click MCU Backup to backup the MCU files.
If the backup is successful, click MCU Disable to disable the
MCU. If the backup was not successful, co
© 2019-2026 Copyright www.tesms.org
