Tesla Model S Owners & Service Manuals

Tesla Model S: Seal - Liftgate (Remove and Replace)

Tesla Model S (2012-2026) Service Manual / Closures / Seal - Liftgate (Remove and Replace)

Removal

  1. Open vehicle tailgate.
  2. Release tailgate seal from body and carefully remove.

    Note: Components have been removed in this graphic to aid clarity.

    Seal - Liftgate (Remove and Replace)

Installation

Installation procedure is the reverse of removal.

    READ NEXT:

     Seal - Door Front Outer Belt - LH (Remove and Replace)

    Removal Lower window glass. Using a suitable tool release outer belt seal, starting at the mirror and working backwards. Caution: Protect paintwork from possible damage du

     Seal - Door Front Inner Belt - LH (Remove and Replace)

    Removal Lower door glass. Remove door trim panel (refer to procedure) Remove trim stud securing flap seal to door. Carefully ease flap seal clear of inner belt seal for access.

     Seal - Belt - Door Inner - Rear - LH (Remove and Replace)

    Removal Lower door glass. Remove door trim panel (refer to procedure) Release trim studs (x2) securing flap seal to door. Carefully ease flap seals clear of inner belt seal for ac

    SEE MORE:

     Charging equipment not recognized

    Try again or try different equipment The charge port is unable to detect whether a charge cable is inserted or the type of charge cable connected. If this alert appears while a charge cable is connected, it should be determined whether the issue is caused by the charging equipment or the vehicle

     Liftgate Glass (Replace)

    Installation Use the adhesive scraper to remove the excess urethane from the body. Temporarily reconnect the CHMSL to the harness in the center of the liftgate and have an assistant depress the brake pedal. Ensure that the CHMSL lights up properly. If any of the LEDs have be

    © 2019-2026 Copyright www.tesms.org