Tesla Model S: Specifications
Tesla Model S (2012-2026) Owner's Manual / Specifications
READ NEXT:
Identification Labels
Vehicle Identification Number
You can find the VIN at the following locations:
Touch Controls > Software.
Stamped on a plate located at the top of the
dashboard. Can be seen by looking through
Vehicle Labeling
It is important to understand your vehicle's original tire
sizes and pressures, and the GVWR (Gross Vehicle
Weight Rating) and GAWR (Gross Axle Weight Rating).
This information can be found on two
SEE MORE:
Air Line - Air Suspension - Valve Block Exhaust (Remove and Replace)
Removal
Raise and support the vehicle (refer to procedure).
Remove the underhood storage unit (refer to procedure).
Release the fitting from the valve block (torque 3.5 Nm).
Caution: Plug the line connection to prevent
ingress of moisture or dirt.
Actuator - Latch - Hood - LH (Dual Motor) (Remove and Replace)
Removal
Remove the ankle catcher (refer to procedure).
Remove the LH and RH condenser ducts (refer to procedure).
Remove the plastic rivets (x3) that secure the center louver
assembly.
Note: The following image shows the center
louver assembly from the rear.
© 2019-2026 Copyright www.tesms.org
