Tesla Model S: A/C Refrigerant Recovery and Recharge (Remove and Replace)
READ NEXT:
Warning: Servicing must only be performed by personnel
familiar with both vehicle systems and the charging and testing
equipment. Always read and understand the HVAC machine operator's
man
Note: Before beginning this section,
complete the "Set Up HVAC Machine" section.
Connect a laptop with Toolbox to the vehicle.
Remove the rear underhood apron (refer to procedure).
Recover refrigerant from the vehicle (refer to procedure), see section "Recover
Refrigerant and Verify Charge").
Remove the underhood storage unit(refer to procedure).
Release the bolt that se
SEE MORE:
Removal
Remove driver side lower dash trim (refer to procedure).
Remove the lower binnacle cover.
Remove the 2 screws beneath the lower binnacle cover that secure
the IP top pad to the IP carrier.
Tools required:
12V power supply
Laptop with Toolbox 2.0 or higher
USB-CAN dongle
CHAdeMO CAN programming connector
CAN Setup
Connect the USB-CAN dongle to a laptop that is equipped with
Toolbox 2.0 or higher.
Connect the CHAdeMO CAN programming connector to the