Tesla Model S: Bosch-Supplied Tools
223-34-36-08
Tesla part number: |
n/a |
|
Description: |
Anti Static Mat/w Wrist Grounding Cord and Wrist Strap |
Model: |
n/a |
Status: |
Distribution from Bosch |
Special project/SOP: |
n/a |
Instructions: |
TN-14-92-003: "Electrostatic Discharge Tooling" |
|
223-479-007
Tesla part number: |
n/a |
|
Description: |
Ground/Circuit Tester w/wrist strap connection (SP-101
Stanley) |
Model: |
n/a |
Status: |
Distribution from Bosch |
Special project/SOP: |
n/a |
Instructions: |
TN-14-92-003: "Electrostatic Discharge Tooling" |
|
223-MPC3
Tesla part number: |
n/a |
|
Description: |
Wiss Snips |
Model: |
Model S |
Status: |
Distribution from Bosch |
Special project/SOP: |
Rear arch liners |
Instructions: |
SB-14-12-004: "Modify Rear Arch Liners" |
|
223-MR05029-TSL
Tesla part number: |
1049517-00-A |
|
Description: |
Ergonomic Silicone Seam Roller |
Model: |
Model S |
Status: |
Distribution from Bosch |
Special project/SOP: |
n/a |
Instructions: |
Battery Blanket (Remove and Replace) |
|
223-PGC015G
Tesla part number: |
n/a |
|
Description: |
Ground Cable |
Model: |
n/a |
Status: |
Distribution from Bosch |
Special project/SOP: |
n/a |
Instructions: |
TN-14-92-003: "Electrostatic Discharge Tooling" |
|
223-RNHT-M6
Tesla part number: |
n/a |
|
Description: |
Rivet Nut Installer 6mm |
Model: |
Model S |
Status: |
Distribution from Bosch |
Special project/SOP: |
Underbody shield |
Instructions: |
Rivet nut installer instructions |
|
697-0700-4
Tesla part number: |
n/a |
|
Description: |
Coolant System Tester (Pump and One Adapter) |
Model: |
n/a |
Status: |
Distribution from Bosch |
Special project/SOP: |
n/a |
Instructions: |
Cooling System - Drain and Refill
Note: Only the reservoir adapter is used
for this procedure.
|
|
Electronic Devices
RST-184-A
Tesla part number: |
1013547-00-A |
|
Description: |
TOOL, TPMS, ROADSTER & MODEL S |
Model: |
Roadster, Model S |
Status: |
Distribution |
Special project/SOP: |
SOP |
Instructions: |
n/a |
|
RST-192
Tesla part number: |
1028369-00-A |
|
Description: |
Memorator Pro HS/HS |
Model: |
Roadster, Model S |
Status: |
Distribution |
Special project/SOP: |
SOP |
Instructions: |
TN-14-92-002: "Memorator Tool Set Up and Use" |
|
RST-372
Tesla part number: |
1030925-00-A |
|
Description: |
ASY, RELEASE TOOL, EPB CONTROLLER REWORK |
Model: |
Model S |
Status: |
Distribution |
Special project/SOP: |
SOP |
Instructions: |
n/a |
|
1045160-00-A
Tesla part number: |
1045160-00-A |
|
Description: |
CHAdeMO Programming Tool, Turn-Key |
Model: |
Model S |
Status: |
Distribution |
Special project/SOP: |
SOP |
Instructions: |
Firmware Update - CHAdeMO Charging Adapter |
|
RST-422
Tesla part number: |
1047436-00-A |
|
Description: |
Battery Tester, Key Fob |
Model: |
Roadster, Model S |
Status: |
Distribution |
Special project/SOP: |
SOP |
Instructions: |
Special Tools - Electronic Devices - Remote Keyless Entry (RKE)
Battery Tester |
|
READ NEXT:
RST-324
Tesla part number:
1024264-00-A
Description:
Wheel Lock Keys for Tooling, MDLS
RST-320
Tesla part number:
1005706-00-C
Description:
Model S Coolant Rapidmate Cover
RST-182-F
Tesla part number:
1013716-00-A
Description:
TOOL, HARNESS, 4-WAY BREAKOUT
SEE MORE:
Removal
Remove driver side lower dash trim (refer to procedure).
Remove the lower binnacle cover.
Remove the 2 screws beneath the lower binnacle cover that secure
the IP top pad to the IP carrier.
Warning: If the vehicle has air suspension, activate "Jack"
mode on the touchscreen before raising and supporting the vehicle.
Removal
Remove the wheel (refer to procedure).
Remove the nut that secures the ride height sensor link and
release it from the upper suspension