Tesla Model S: Electric Vehicle Components
Tesla Model S (2012-2026) Owner's Manual / Charging / Electric Vehicle Components
READ NEXT:
High Voltage Components
Heat Pump Assembly
Front Drive Unit
Service Access Panel for High Voltage Components (Penthouse)
High Voltage Battery
High Voltage Busbars
Rear Drive Unit
Charge Port
NOTE: Plaid version not
Charging Equipment
Charging equipment designed specifically to charge
your Model S is available from Tesla. A Tesla Wall
Connector, which installs in your parking space, is the
fastest way to charge Model S for daily
SEE MORE:
General Fitting Instructions
Component removal
Whenever possible, clean components and surrounding area before removal.
Cap off openings exposed by component removal.
Immediately seal fuel, oil or hydraulic lines when apertures are
exposed; use plastic caps or plugs to prevent loss of fluid and
ingress of dirt.
Duct - Condenser LH (Remove and Replace)
Removal
Remove the front fascia assembly (refer to procedure).
Remove the bolts (x4) that secure the duct to the condenser
housing (torque 16 Nm on vehicles equipped with a magnesium Carrier,
torque 4 Nm on vehicles equipped with a composite Carrier).
© 2019-2026 Copyright www.tesms.org
