Tesla Model S: Fixed Glass - Front Door - LH (Remove and Replace)
Removal
- Remove the front door mirror assembly (refer to procedure).
- Carefully release the quarter glass from the seal and frame.
Installation
Installation procedure is the reverse of removal.
READ NEXT:
Warning: To avoid personal injury, wear cut-resistant
gloves when performing this operation.
Note: Use Dow Betaseal Express or an equivalent fast-curing
glass adhesive to perform this pr
Warning: To avoid personal injury, wear cut-resistant
gloves when performing this operation.
Note: Use Dow Betaseal Express or an equivalent fast-curing
glass adhesive to perform this proced
SEE MORE:
Removal
Remove fork and control link for acces (refer to procedure)
Remove screws (x3) securing PCB to housing (torque 1.5 Nm).
Release PCB pressure sensor from housing and disconnect wiring.
Remove assembly
Warning: If the vehicle has air suspension, activate "Jack"
mode on the touchscreen before raising and supporting the vehicle.
Warning: If the 12V power supply is disconnected, do
not attempt to open any doors with door glass in closed position.
Failure to follow this instruction c