Tesla Model S: Seal - Hood (Remove and Replace)
Removal
- Open the luggage compartment.
- Release the seal from luggage compartment surround.
Note: Components have been removed in this
graphic to aid clarity.
- Remove the seal from the vehicle.
InstallationInstallation procedure is the reverse of removal.
READ NEXT:
Removal
Open vehicle tailgate.
Release tailgate seal from body and carefully remove.
Note: Components have been removed in this graphic
to aid clarity.
Removal
Lower window glass.
Using a suitable tool release outer belt seal, starting at the
mirror and working backwards.
Caution: Protect paintwork from possible damage du
Removal
Lower door glass.
Remove door trim panel (refer to procedure)
Remove trim stud securing flap seal to door.
Carefully ease flap seal clear of inner belt seal for access.
SEE MORE:
Removal
Remove the IP carrier (refer to procedure).
Remove the center console (refer to procedure).
Remove the nuts (x2) that secure the driver knee airbag. Retain
the washers (x2). Disconnect the harness connector and remove the
airbag from the vehicle (torque 10.5 Nm).
Warning: If the vehicle has air suspension, activate "Jack"
mode on the touchscreen before raising and supporting the vehicle.
Drain & Refill
Position the vehicle in preparation for raising it, but do not
raise it at this time.
Air suspension vehicles only: Depressurize th