Tesla Model S: Seat Assembly - 3rd Row (Remove and Replace)
Tesla Model S (2012-2026) Service Manual / Seats / Seat Assembly - 3rd Row (Remove and Replace)
READ NEXT:
Seat Assembly - 3rd Row (Remove)
Removal
Open the liftgate.
Fold down the third row seats.
Caution: Take care not to damage component(s).
Caution: Protect the interior trim from possi
Seat Assembly - 3rd Row (Replace)
Installation
Installation procedure is the reverse of removal, except for the
following:
Before installing the mounting bolts, ensure that the
mounting bracket holes
Cover - Outer Side - Driver's Seat (Remove and Install)
Removal
Open both driver's side doors.
Power the seat height adjust fully upwards for access.
Remove the screw that secures the outer side cover to the seat
(torque 1 Nm).
SEE MORE:
Sensor - Intrusion - Door - Front (Remove and Replace)
Removal
Remove door trim panel (refer to procedure)
Remove screws (x2) securing impact sensor to door (torque 5 Nm).
Disconnect sensor harness connection.
Installation
Installation procedure is the reverse
Sensor - Wheel Speed - ABS - Rear - LH (Remove and Replace)
Warning: If the vehicle
has air suspension, activate "Jack" mode on the touchscreen before
raising and supporting the vehicle.
Removal
Raise and support the vehicle
(refer to procedure)
Remove road wheel for access
(refer to procedure)
Remove screw
© 2019-2026 Copyright www.tesms.org
