Tesla Model S: Pivot Sleeve - Seat back - 2nd Row Seat - LH (Remove and Replace)
Tesla Model S (2012-2026) Service Manual / Seats / Pivot Sleeve - Seat back - 2nd Row Seat - LH (Remove and Replace)
Removal
- Remove Rear LH seat back rest assembly (refer to procedure)
- Spread nose of pivot sleeve and remove from LH seat backrest.
READ NEXT:
Seat Assembly - 3rd Row (Remove)
Removal
Open the liftgate.
Fold down the third row seats.
Caution: Take care not to damage component(s).
Caution: Protect the interior trim from possi
Seat Assembly - 3rd Row (Replace)
Installation
Installation procedure is the reverse of removal, except for the
following:
Before installing the mounting bolts, ensure that the
mounting bracket holes
SEE MORE:
Raise Vehicle - 2 Post Lift
Warning: "Jack mode" must be activated on vehicles with air
suspension before lifting the vehicle. Failure to do this might lead
to suspension damage and could cause serious personal injury.
Note: Vehicles with air suspension might need the
suspension to be set to "High" or "Very High"
TXV Valve - Chiller (Remove and Replace)
Removal
Recover refrigerant from the vehicle (refer to procedure).
Remove the front skid plate (refer to procedure).
Remove the nut that secures the pipe retaining plate to the TXV
(torque 12 Nm).
Disconnect the
© 2019-2026 Copyright www.tesms.org
